VMOAV - Diaphragm valve DN 80:100

Diaphragm valve with flanged monolithic body, drilled ANSI B16.5 cl. 150 #FF.

The VM is particularly suitable for shutting off and regulating abrasive or dirty fluids. The handwheel control and diaphragm seal provide precise and effective control, while reducing the risk of water hammer to a minimum.

Main features:

  • Handwheel in (PA-GR) with high mechanical strength and ergonomic grip for optimum manageability
  • Metal optical position indicator supplied as standard
  • Full protection bonnet in PP-GR Internal circular and symmetrical diaphragm sealing area
  • Diaphragm available in EPDM, FPM, PTFE (NBR on request) and easy to replace
  • Threaded metal inserts for anchoring the valve
  • New valve body internal design: substantially higher flow coefficient resulting in lower pressure drops. Optimised adjustment curve for effective and precise flow rate regulation
Go back

EPDM

Reference Name Product description product.detail.attribute.technicalFeatures product.detail.attribute.mainFeatures product.detail.attribute.textBelowTableText dimensionalTable Main category Subcategory Sub sub category system Category family series Material d DN PN B B[5:1] F f H H[5:1] I J Sp U g
VMOAV300E EPDM The VM is particularly suitable for shutting off and regulating abrasive or dirty fluids. The handwheel control and diaphragm seal provide precise and effective control, while reducing the risk of water hammer to a minimum. Connection system for solvent welding and for flanged jointsOptimised fluid dynamic design: maximum output flow rate thanks to the optimised efficiency of the fluid dynamics that characterise the new internal geometry of the bodyHandwheel that stays at the same height during rotation, with internal bearing to minimise friction and operating torqueStandard optical indicatorInternal operating components in metal totally isolated from the conveyed fluidBonnet fastening screws in STAINLESS steel protected against the external environment by PE plugsNew flanged bodies: the new bodies, characterised by a monolithic flanged structure, are available in PVC-U, PVC-C, PP-H and PVDF. This design, free from body and flange joints, greatly reduces mechanical stress and increases system performance. Handwheel in (PA-GR) with high mechanical strength and ergonomic grip for optimum manageabilityMetal optical position indicator supplied as standardFull protection bonnet in PP-GR Internal circular and symmetrical diaphragm sealing areaDiaphragm available in EPDM, FPM, PTFE (NBR on request) and easy to replaceThreaded metal inserts for anchoring the valveNew valve body internal design: substantially higher flow coefficient resulting in lower pressure drops. Optimised adjustment curve for effective and precise flow rate regulation * PTFE: PN 6 For installation prior to october 2017 please contact Fip Technical Support - PVC-U system Diaphragm valves VM DN 80÷100 PVC-U system Manual valves Diaphragm valves VM DN 80÷100 PVC-U 3" 80 *10 225 64 152,4 19,1 263 200 100 M12 21,5 4 8500
VMOAV400E EPDM The VM is particularly suitable for shutting off and regulating abrasive or dirty fluids. The handwheel control and diaphragm seal provide precise and effective control, while reducing the risk of water hammer to a minimum. Connection system for solvent welding and for flanged jointsOptimised fluid dynamic design: maximum output flow rate thanks to the optimised efficiency of the fluid dynamics that characterise the new internal geometry of the bodyHandwheel that stays at the same height during rotation, with internal bearing to minimise friction and operating torqueStandard optical indicatorInternal operating components in metal totally isolated from the conveyed fluidBonnet fastening screws in STAINLESS steel protected against the external environment by PE plugsNew flanged bodies: the new bodies, characterised by a monolithic flanged structure, are available in PVC-U, PVC-C, PP-H and PVDF. This design, free from body and flange joints, greatly reduces mechanical stress and increases system performance. Handwheel in (PA-GR) with high mechanical strength and ergonomic grip for optimum manageabilityMetal optical position indicator supplied as standardFull protection bonnet in PP-GR Internal circular and symmetrical diaphragm sealing areaDiaphragm available in EPDM, FPM, PTFE (NBR on request) and easy to replaceThreaded metal inserts for anchoring the valveNew valve body internal design: substantially higher flow coefficient resulting in lower pressure drops. Optimised adjustment curve for effective and precise flow rate regulation * PTFE: PN 6 For installation prior to october 2017 please contact Fip Technical Support - PVC-U system Diaphragm valves VM DN 80÷100 PVC-U system Manual valves Diaphragm valves VM DN 80÷100 PVC-U 4" 100 *10 295 72 190,5 19,1 328 250 120 M12 22,5 8 12400

* PTFE: PN 6
For installation prior to october 2017 please contact Fip Technical Support

FKM

Reference Name Product description product.detail.attribute.technicalFeatures product.detail.attribute.mainFeatures product.detail.attribute.textBelowTableText dimensionalTable Main category Subcategory Sub sub category system Category family series Material d DN PN B B[5:1] F f H H[5:1] I J Sp U g
VMOAV300F FKM The VM is particularly suitable for shutting off and regulating abrasive or dirty fluids. The handwheel control and diaphragm seal provide precise and effective control, while reducing the risk of water hammer to a minimum. Connection system for solvent welding and for flanged jointsOptimised fluid dynamic design: maximum output flow rate thanks to the optimised efficiency of the fluid dynamics that characterise the new internal geometry of the bodyHandwheel that stays at the same height during rotation, with internal bearing to minimise friction and operating torqueStandard optical indicatorInternal operating components in metal totally isolated from the conveyed fluidBonnet fastening screws in STAINLESS steel protected against the external environment by PE plugsNew flanged bodies: the new bodies, characterised by a monolithic flanged structure, are available in PVC-U, PVC-C, PP-H and PVDF. This design, free from body and flange joints, greatly reduces mechanical stress and increases system performance. Handwheel in (PA-GR) with high mechanical strength and ergonomic grip for optimum manageabilityMetal optical position indicator supplied as standardFull protection bonnet in PP-GR Internal circular and symmetrical diaphragm sealing areaDiaphragm available in EPDM, FPM, PTFE (NBR on request) and easy to replaceThreaded metal inserts for anchoring the valveNew valve body internal design: substantially higher flow coefficient resulting in lower pressure drops. Optimised adjustment curve for effective and precise flow rate regulation * PTFE: PN 6 For installation prior to october 2017 please contact Fip Technical Support - PVC-U system Diaphragm valves VM DN 80÷100 PVC-U system Manual valves Diaphragm valves VM DN 80÷100 PVC-U 3" 80 *10 225 64 152,4 19,1 263 200 100 M12 21,5 4 8500
VMOAV400F FKM The VM is particularly suitable for shutting off and regulating abrasive or dirty fluids. The handwheel control and diaphragm seal provide precise and effective control, while reducing the risk of water hammer to a minimum. Connection system for solvent welding and for flanged jointsOptimised fluid dynamic design: maximum output flow rate thanks to the optimised efficiency of the fluid dynamics that characterise the new internal geometry of the bodyHandwheel that stays at the same height during rotation, with internal bearing to minimise friction and operating torqueStandard optical indicatorInternal operating components in metal totally isolated from the conveyed fluidBonnet fastening screws in STAINLESS steel protected against the external environment by PE plugsNew flanged bodies: the new bodies, characterised by a monolithic flanged structure, are available in PVC-U, PVC-C, PP-H and PVDF. This design, free from body and flange joints, greatly reduces mechanical stress and increases system performance. Handwheel in (PA-GR) with high mechanical strength and ergonomic grip for optimum manageabilityMetal optical position indicator supplied as standardFull protection bonnet in PP-GR Internal circular and symmetrical diaphragm sealing areaDiaphragm available in EPDM, FPM, PTFE (NBR on request) and easy to replaceThreaded metal inserts for anchoring the valveNew valve body internal design: substantially higher flow coefficient resulting in lower pressure drops. Optimised adjustment curve for effective and precise flow rate regulation * PTFE: PN 6 For installation prior to october 2017 please contact Fip Technical Support - PVC-U system Diaphragm valves VM DN 80÷100 PVC-U system Manual valves Diaphragm valves VM DN 80÷100 PVC-U 4" 100 *10 295 72 190,5 19,1 328 250 120 M12 22,5 8 12400

* PTFE: PN 6
For installation prior to october 2017 please contact Fip Technical Support

PTFE

Reference Name Product description product.detail.attribute.technicalFeatures product.detail.attribute.mainFeatures product.detail.attribute.textBelowTableText dimensionalTable Main category Subcategory Sub sub category system Category family series Material d DN PN B B[5:1] F f H H[5:1] I J Sp U g
VMOAV300P PTFE The VM is particularly suitable for shutting off and regulating abrasive or dirty fluids. The handwheel control and diaphragm seal provide precise and effective control, while reducing the risk of water hammer to a minimum. Connection system for solvent welding and for flanged jointsOptimised fluid dynamic design: maximum output flow rate thanks to the optimised efficiency of the fluid dynamics that characterise the new internal geometry of the bodyHandwheel that stays at the same height during rotation, with internal bearing to minimise friction and operating torqueStandard optical indicatorInternal operating components in metal totally isolated from the conveyed fluidBonnet fastening screws in STAINLESS steel protected against the external environment by PE plugsNew flanged bodies: the new bodies, characterised by a monolithic flanged structure, are available in PVC-U, PVC-C, PP-H and PVDF. This design, free from body and flange joints, greatly reduces mechanical stress and increases system performance. Handwheel in (PA-GR) with high mechanical strength and ergonomic grip for optimum manageabilityMetal optical position indicator supplied as standardFull protection bonnet in PP-GR Internal circular and symmetrical diaphragm sealing areaDiaphragm available in EPDM, FPM, PTFE (NBR on request) and easy to replaceThreaded metal inserts for anchoring the valveNew valve body internal design: substantially higher flow coefficient resulting in lower pressure drops. Optimised adjustment curve for effective and precise flow rate regulation * PTFE: PN 6 For installation prior to october 2017 please contact Fip Technical Support - PVC-U system Diaphragm valves VM DN 80÷100 PVC-U system Manual valves Diaphragm valves VM DN 80÷100 PVC-U 3" 80 *10 225 64 152,4 19,1 263 200 100 M12 21,5 4 8500
VMOAV400P PTFE The VM is particularly suitable for shutting off and regulating abrasive or dirty fluids. The handwheel control and diaphragm seal provide precise and effective control, while reducing the risk of water hammer to a minimum. Connection system for solvent welding and for flanged jointsOptimised fluid dynamic design: maximum output flow rate thanks to the optimised efficiency of the fluid dynamics that characterise the new internal geometry of the bodyHandwheel that stays at the same height during rotation, with internal bearing to minimise friction and operating torqueStandard optical indicatorInternal operating components in metal totally isolated from the conveyed fluidBonnet fastening screws in STAINLESS steel protected against the external environment by PE plugsNew flanged bodies: the new bodies, characterised by a monolithic flanged structure, are available in PVC-U, PVC-C, PP-H and PVDF. This design, free from body and flange joints, greatly reduces mechanical stress and increases system performance. Handwheel in (PA-GR) with high mechanical strength and ergonomic grip for optimum manageabilityMetal optical position indicator supplied as standardFull protection bonnet in PP-GR Internal circular and symmetrical diaphragm sealing areaDiaphragm available in EPDM, FPM, PTFE (NBR on request) and easy to replaceThreaded metal inserts for anchoring the valveNew valve body internal design: substantially higher flow coefficient resulting in lower pressure drops. Optimised adjustment curve for effective and precise flow rate regulation * PTFE: PN 6 For installation prior to october 2017 please contact Fip Technical Support - PVC-U system Diaphragm valves VM DN 80÷100 PVC-U system Manual valves Diaphragm valves VM DN 80÷100 PVC-U 4" 100 *10 295 72 190,5 19,1 328 250 120 M12 22,5 8 12400

* PTFE: PN 6
For installation prior to october 2017 please contact Fip Technical Support

  • Connection system for solvent welding and for flanged joints
  • Optimised fluid dynamic design: maximum output flow rate thanks to the optimised efficiency of the fluid dynamics that characterise the new internal geometry of the body
  • Handwheel that stays at the same height during rotation, with internal bearing to minimise friction and operating torque
  • Standard optical indicator
  • Internal operating components in metal totally isolated from the conveyed fluid
  • Bonnet fastening screws in STAINLESS steel protected against the external environment by PE plugs
  • New flanged bodies: the new bodies, characterised by a monolithic flanged structure, are available in PVC-U, PVC-C, PP-H and PVDF. This design, free from body and flange joints, greatly reduces mechanical stress and increases system performance.

Downloads